id
stringlengths 14
16
| text
stringlengths 10
1.45k
| source
stringlengths 46
118
|
---|---|---|
9247a2d65b64-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Sensirion uart sfa3x
Sensirion UART SFA3x
Sensors
Library for the SFA3X sensor family by Sensirion
Enables you to use the SFA30 sensor via UART using the SHDLC protocol.
Author: Sensirion
Maintainer: Sensirion
Read the documentation
Go to repository
Compatibility
This library is compatible with the
architecture.
Releases
To use this library, open the Library Manager in
the
|
https://www.arduino.cc/reference/en/libraries/sensirion-uart-sfa3x/index.html
|
9247a2d65b64-1
|
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
0.1.0
(latest)
|
https://www.arduino.cc/reference/en/libraries/sensirion-uart-sfa3x/index.html
|
c46727a38b00-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Mcp23017
MCP23017
Signal Input/Output
MCP23017 I2C Port expander library.
Support all MCP23017 features, including interrupts. Allows full control over the chip registers.
Author: Bertrand Lemasle
Maintainer: Bertrand Lemasle
Read the documentation
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
|
https://www.arduino.cc/reference/en/libraries/mcp23017/index.html
|
c46727a38b00-1
|
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
2.0.0
(latest)
1.2.0
1.1.2
1.1.1
1.1.0
1.0.1
1.0.0
|
https://www.arduino.cc/reference/en/libraries/mcp23017/index.html
|
06bed9da9991-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Energesis lm35
Energesis LM35
Sensors
Driver for LM35 series temperature sensor.
Library for interfacing with the LM35 sensor series.
Author: Jose Guerra Carmenate
Maintainer: Jose Guerra Carmenate
Read the documentation
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
|
https://www.arduino.cc/reference/en/libraries/energesis-lm35/index.html
|
06bed9da9991-1
|
the
Arduino IDE and install it from there.
0.1.2
(latest)
0.1.1
|
https://www.arduino.cc/reference/en/libraries/energesis-lm35/index.html
|
da845dc9cc62-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Ezled
ezLED
Signal Input/Output
LED library for Arduino
LED library supports turn on/off, toggle, fade in/out, blink, blink in period, blink in a number of time. It is easy to use to control multiple LEDs... It is designed for not only beginners but also experienced users
Author: ArduinoGetStarted.com
Maintainer: ArduinoGetStarted.com (ArduinoGetStarted@gmail.com)
Read the documentation
Go to repository
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
|
https://www.arduino.cc/reference/en/libraries/ezled/index.html
|
da845dc9cc62-1
|
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.0.1
(latest)
1.0.0
|
https://www.arduino.cc/reference/en/libraries/ezled/index.html
|
bbe3e5784363-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Datetimehelpers
dateTimeHelpers
Data Processing
Arduino library with date and time helper functions.
Author: Rob Tillaart
Maintainer: Rob Tillaart
Read the documentation
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
0.1.2
(latest)
0.1.1
|
https://www.arduino.cc/reference/en/libraries/datetimehelpers/index.html
|
15d5f5fd73b3-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Nhb ad7794
NHB_AD7794
Sensors
Library for using the Analog Devices AD7794 6ch 24 bit precision analog converter IC
Author: Jaimy Juliano
Maintainer: NHB Systems
Read the documentation
Compatibility
This library is compatible with the avr, samd, esp32, esp8266
architectures so you
should be able to use it on the
following Arduino boards:
Arduino Micro
Arduino Leonardo
Arduino Mega
Arduino MKR FOX 1200
Arduino MKR GSM 1400
|
https://www.arduino.cc/reference/en/libraries/nhb_ad7794/index.html
|
15d5f5fd73b3-1
|
Arduino Mega
Arduino MKR FOX 1200
Arduino MKR GSM 1400
Arduino MKR NB 1500
Arduino MKR VIDOR 4000
Arduino MKR WAN 1300 (LoRa connectivity)
Arduino MKR WAN 1310
Arduino MKR WiFi 1010
Arduino MKR ZERO (I2S bus & SD for sound, music & digital audio data)
Arduino MKR1000 WIFI
Arduino Nano
Arduino Nano 33 IoT
Arduino Uno
Arduino Yún
Arduino Zero
Compatibility Note
Note: while the library is supposed to compile correctly on these architectures,
it might require specific hardware features that may be available only on some boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.2.1
(latest)
1.2.0
|
https://www.arduino.cc/reference/en/libraries/nhb_ad7794/index.html
|
15d5f5fd73b3-2
|
1.2.1
(latest)
1.2.0
1.1.1
1.1.0
1.0.0
|
https://www.arduino.cc/reference/en/libraries/nhb_ad7794/index.html
|
5f18b14ad187-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Esp32motorcontrol
ESP32MotorControl
Other
Motor control using ESP32 MCPWM
To control up 2 DC motors
Author: Joao Lopes
Maintainer: Joao Lopes
Read the documentation
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
0.1.0
(latest)
|
https://www.arduino.cc/reference/en/libraries/esp32motorcontrol/index.html
|
2ddea1aa136b-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Xpt2046 touchscreen
XPT2046_Touchscreen
Display
Touchscreens using the XPT2046 controller chip.
Many very low cost color TFT displays with touch screens have this chip.
Author: Paul Stoffregen
Maintainer: Paul Stoffregen
Read the documentation
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
|
https://www.arduino.cc/reference/en/libraries/xpt2046_touchscreen/index.html
|
2ddea1aa136b-1
|
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.4.0
(latest)
1.3.0
1.2.0
1.1.0
1.0.0
|
https://www.arduino.cc/reference/en/libraries/xpt2046_touchscreen/index.html
|
327fed02f157-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Ssd1803a i2c
SSD1803A_I2C
Display
LCD library for EA DOGx displays.
LCD library for EA DOGM204, DOGS164 and DOGS104 LCD displays with SSD1803A controller using the I2C interface.
Author: Stefan Staub
Maintainer: Stefan Staub
Read the documentation
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
|
https://www.arduino.cc/reference/en/libraries/ssd1803a_i2c/index.html
|
327fed02f157-1
|
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.0.2
(latest)
1.0.1
|
https://www.arduino.cc/reference/en/libraries/ssd1803a_i2c/index.html
|
2cf20006bb15-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Xsens mti spi
Xsens_MTi_SPI
Sensors
This library demonstrates the basics of communicating with Xsens MTi 1-series devices through SPI.
Functionalities included are initialization, output configuration and data parsing.
Author: S. Gies (v1.0.0)
Maintainer: Movella/Xsens
Read the documentation
Go to repository
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
|
https://www.arduino.cc/reference/en/libraries/xsens_mti_spi/index.html
|
2cf20006bb15-1
|
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.0.0
(latest)
|
https://www.arduino.cc/reference/en/libraries/xsens_mti_spi/index.html
|
7b9f254d3b08-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Agirs
AGirs
Device Control
A Girs infrared server for the Arduino platform.
Requires Infrared4Arduino. Examples use Ethernet and Beacon.
Author: Bengt Martensson
Maintainer: Bengt Martensson
Read the documentation
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.0.5
|
https://www.arduino.cc/reference/en/libraries/agirs/index.html
|
7b9f254d3b08-1
|
the
Arduino IDE and install it from there.
1.0.5
(latest)
1.0.4
1.0.3
1.0.2
1.0.1
1.0.0
|
https://www.arduino.cc/reference/en/libraries/agirs/index.html
|
21490eaa2397-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Grove haptic motor
Grove - Haptic Motor
Sensors
Arduino library to control Grove - Haptic Motor.
Grove - Haptic motor is a Grove module integrated with DRV2605L which will give your project more feelings. This motor is specially designed for various effects, such as to ramp the vibration level up and down, for wearable and IoT devices..
Author: Seeed Studio
Maintainer: Seeed Studio
Read the documentation
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
|
https://www.arduino.cc/reference/en/libraries/grove-haptic-motor/index.html
|
21490eaa2397-1
|
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.0.0
(latest)
|
https://www.arduino.cc/reference/en/libraries/grove-haptic-motor/index.html
|
a41d0ed85395-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Udebuglib
uDebugLib
Communication
Simple convenient header file to centralize simple serial debug with simple activation/deactivation and some custmization
Supports any architecture
Author: Naguissa
Maintainer: Naguissa
Read the documentation
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.0.2
(latest)
|
https://www.arduino.cc/reference/en/libraries/udebuglib/index.html
|
a41d0ed85395-1
|
1.0.2
(latest)
1.0.1
1.0.0
|
https://www.arduino.cc/reference/en/libraries/udebuglib/index.html
|
9f0c62100f92-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Pinchangeinterrupt
PinChangeInterrupt
Signal Input/Output
A simple & compact PinChangeInterrupt library for Arduino.
PinChangeInterrupt library with a resource friendly implementation (API and LowLevel). PinChangeInterrupts are different than normal Interrupts. See readme for more information.
Author: NicoHood
Maintainer: NicoHood
Read the documentation
Compatibility
This library is compatible with the avr
architecture so you
should be able to use it on the
following Arduino boards:
Arduino Micro
Arduino Leonardo
Arduino Mega
|
https://www.arduino.cc/reference/en/libraries/pinchangeinterrupt/index.html
|
9f0c62100f92-1
|
following Arduino boards:
Arduino Micro
Arduino Leonardo
Arduino Mega
Arduino Nano
Arduino Uno
Arduino Yún
Compatibility Note
Note: while the library is supposed to compile correctly on these architectures,
it might require specific hardware features that may be available only on some boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.2.9
(latest)
1.2.8
1.2.7
1.2.6
1.2.4
1.2.2
1.2.1
1.2.0
|
https://www.arduino.cc/reference/en/libraries/pinchangeinterrupt/index.html
|
64bcf727484a-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Dfrobot oxygensensor
DFRobot_OxygenSensor
Sensors
DFRobot Standard library.
DFRobot_OxygenSensor is the standard library of DFRobot.
Author: DFRobot
Maintainer: ZhixinLiu
Read the documentation
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.0.0
|
https://www.arduino.cc/reference/en/libraries/dfrobot_oxygensensor/index.html
|
64bcf727484a-1
|
the
Arduino IDE and install it from there.
1.0.0
(latest)
|
https://www.arduino.cc/reference/en/libraries/dfrobot_oxygensensor/index.html
|
003ab146fc00-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> 107 arduino criticalsection
107-Arduino-CriticalSection
Other
Arduino library for providing a consistent critical section interface over various Arduino platforms.
Author: Alexander Entinger
Maintainer: Alexander Entinger
Read the documentation
Compatibility
This library is compatible with the samd, mbed, mbed_nano, mbed_portenta, mbed_edge, esp32, rp2040
architectures so you
should be able to use it on the
following Arduino boards:
Arduino MKR FOX 1200
Arduino MKR GSM 1400
|
https://www.arduino.cc/reference/en/libraries/107-arduino-criticalsection/index.html
|
003ab146fc00-1
|
Arduino MKR FOX 1200
Arduino MKR GSM 1400
Arduino MKR NB 1500
Arduino MKR VIDOR 4000
Arduino MKR WAN 1300 (LoRa connectivity)
Arduino MKR WAN 1310
Arduino MKR WiFi 1010
Arduino MKR ZERO (I2S bus & SD for sound, music & digital audio data)
Arduino MKR1000 WIFI
Arduino Nano 33 BLE
Arduino Nano 33 IoT
Arduino Zero
Portenta H7
Compatibility Note
Note: while the library is supposed to compile correctly on these architectures,
it might require specific hardware features that may be available only on some boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.0.0
(latest)
|
https://www.arduino.cc/reference/en/libraries/107-arduino-criticalsection/index.html
|
2fd559043d12-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Stm32duino x nucleo 53l0a1
STM32duino X-NUCLEO-53L0A1
Device Control
Allows controlling the VL53L0X sensors on board of X-NUCLEO-53L0A1
This library provides simple measure distance in mm, single swipe gesture detection, directional (left/right) swipe gesture detection and single tap gesture detection.
Author: AST
Maintainer: stm32duino
Read the documentation
Compatibility
This library is compatible with the stm32, sam
architectures so you
|
https://www.arduino.cc/reference/en/libraries/stm32duino-x-nucleo-53l0a1/index.html
|
2fd559043d12-1
|
Compatibility
This library is compatible with the stm32, sam
architectures so you
should be able to use it on the
following Arduino boards:
Arduino Due
Compatibility Note
Note: while the library is supposed to compile correctly on these architectures,
it might require specific hardware features that may be available only on some boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
2.0.0
(latest)
1.0.3
1.0.2
1.0.1
1.0.0
|
https://www.arduino.cc/reference/en/libraries/stm32duino-x-nucleo-53l0a1/index.html
|
dc591ec15fb8-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Atmega8 io basic
Atmega8_IO_basic
Uncategorized
Library for robot Cing with Atmega8.
This library simplifies programming of robot Cing.
Author: RobotCing Team
Maintainer: RobotCing Team
Read the documentation
Go to repository
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
|
https://www.arduino.cc/reference/en/libraries/atmega8_io_basic/index.html
|
dc591ec15fb8-1
|
the
Arduino IDE and install it from there.
3.0.6
(latest)
3.0.5
3.0.0
|
https://www.arduino.cc/reference/en/libraries/atmega8_io_basic/index.html
|
02f74020b58b-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Sparsearray
SparseArray
Data Processing
Arduino library for sparse arrays of floats.
Author: Rob Tillaart
Maintainer: Rob Tillaart
Read the documentation
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
0.1.1
(latest)
0.1.0
|
https://www.arduino.cc/reference/en/libraries/sparsearray/index.html
|
acf5578fc80e-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Peanutking arduinoshield
PeanutKing ArduinoShield
Uncategorized
Arduino library for controlling ArduinoShield by Peanut King.
Author: PeanutKing Solutions
Maintainer: PeanutKing
Read the documentation
Compatibility
This library is compatible with the avr
architecture so you
should be able to use it on the
following Arduino boards:
Arduino Micro
Arduino Leonardo
Arduino Mega
Arduino Nano
Arduino Uno
Arduino Yún
Compatibility Note
Note: while the library is supposed to compile correctly on these architectures,
|
https://www.arduino.cc/reference/en/libraries/peanutking-arduinoshield/index.html
|
acf5578fc80e-1
|
Compatibility Note
Note: while the library is supposed to compile correctly on these architectures,
it might require specific hardware features that may be available only on some boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.0.1
(latest)
|
https://www.arduino.cc/reference/en/libraries/peanutking-arduinoshield/index.html
|
4badf27c2293-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Nouryas advanced line follower
Nouryas Advanced Line Follower
Sensors
Allows the car to run over a specific path (Line).
This library is compatible with most of 5 IR sensors used for line follower application.it deal with black or White line , and it do digital or analog scan,also it gives you the tool to control the robot speed.
Author: Mohamad Yahya
Maintainer: Nouryas Tech
Read the documentation
Compatibility
This library is compatible with all architectures so you should be able to use
|
https://www.arduino.cc/reference/en/libraries/nouryas-advanced-line-follower/index.html
|
4badf27c2293-1
|
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.1.0
(latest)
1.0.0
|
https://www.arduino.cc/reference/en/libraries/nouryas-advanced-line-follower/index.html
|
7ee67b4097ab-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Phpoc
PHPoC
Communication
PHPoC Ethernet/WiFi Shield for Arduino
IPv6/TCP/EMAIL/SSL/Web communication helper based on PHPoC
Author: Sollae Systems
Maintainer: Sollae Systems (phpoc@phpoc.com)
Read the documentation
Go to repository
Compatibility
This library is compatible with the avr
architecture so you
should be able to use it on the
following Arduino boards:
Arduino Micro
Arduino Leonardo
Arduino Mega
Arduino Nano
Arduino Uno
|
https://www.arduino.cc/reference/en/libraries/phpoc/index.html
|
7ee67b4097ab-1
|
Arduino Micro
Arduino Leonardo
Arduino Mega
Arduino Nano
Arduino Uno
Arduino Yún
Compatibility Note
Note: while the library is supposed to compile correctly on these architectures,
it might require specific hardware features that may be available only on some boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.5.1
(latest)
1.5.0
1.0.1
1.0.0
0.8.0
|
https://www.arduino.cc/reference/en/libraries/phpoc/index.html
|
2bc61b7d306d-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Lorafi
LoRaFi
Communication
An Arduino library for sending and receiving data using LoRaFi board and LoRa module.
Supports Semtech SX1272/73 based boards/shields and LoRaFi board/shield.
Author: Khudhur Abdullah Alfarhan
Maintainer: Khudhur Abdullah Alfarhan
Read the documentation
Go to repository
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
|
https://www.arduino.cc/reference/en/libraries/lorafi/index.html
|
2bc61b7d306d-1
|
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.3.0
(latest)
1.2.1
1.1.0
|
https://www.arduino.cc/reference/en/libraries/lorafi/index.html
|
f51db0359859-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Geekble oscillator
Geekble_Oscillator
Timing
Generate pulse from 31.25KHz to 8MHz
Generate 50% duty pulse from 31.25KHz to 8MHz. Other Functions/Library depend on Timer Counter 2 will affected.
Author: SooDragon
Maintainer: SooDragon@geekble.kr
Read the documentation
Compatibility
This library is compatible with the avr
architecture so you
should be able to use it on the
following Arduino boards:
Arduino Micro
Arduino Leonardo
|
https://www.arduino.cc/reference/en/libraries/geekble_oscillator/index.html
|
f51db0359859-1
|
following Arduino boards:
Arduino Micro
Arduino Leonardo
Arduino Mega
Arduino Nano
Arduino Uno
Arduino Yún
Compatibility Note
Note: while the library is supposed to compile correctly on these architectures,
it might require specific hardware features that may be available only on some boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.0.3
(latest)
0.1.0
|
https://www.arduino.cc/reference/en/libraries/geekble_oscillator/index.html
|
4ce49b5eafff-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Newservo
NewServo
Device Control
An easy-to-use servo motor library for Arduino.
The NewServo Library provides a simple and easy-to-use API for controlling servo motors with Arduino boards.
Author: GhassanYusuf
Maintainer: GhassanYusuf
Read the documentation
Compatibility
This library is compatible with the avr
architecture so you
should be able to use it on the
following Arduino boards:
Arduino Micro
Arduino Leonardo
Arduino Mega
Arduino Nano
Arduino Uno
Arduino Yún
|
https://www.arduino.cc/reference/en/libraries/newservo/index.html
|
4ce49b5eafff-1
|
Arduino Micro
Arduino Leonardo
Arduino Mega
Arduino Nano
Arduino Uno
Arduino Yún
Compatibility Note
Note: while the library is supposed to compile correctly on these architectures,
it might require specific hardware features that may be available only on some boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
0.1.0
(latest)
|
https://www.arduino.cc/reference/en/libraries/newservo/index.html
|
b6499aca4f61-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Gdxlib
GDXLIb
Sensors
A library to allow use of Arduino microcomputers which support the ArduinoBLE library to work with Vernier GDX sensors.
A library to allow use of Arduino Nano 33 BLE, the Arduino Nan 33 Sense, MKR1010, and Uno WiFi Rev 2 to read Vernier GDX sensors via Bluetooth.
Author: David Vernier
Maintainer: support@vernier.com
Read the documentation
Compatibility
This library is compatible with all architectures so you should be able to use
|
https://www.arduino.cc/reference/en/libraries/gdxlib/index.html
|
b6499aca4f61-1
|
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.0.5
(latest)
0.9.1
0.9.0
|
https://www.arduino.cc/reference/en/libraries/gdxlib/index.html
|
98ee0bf19105-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Tfa 433 receiver
TFA 433 Receiver
Sensors
Arduino library for TFA remote Temp & Humidity Sensors
Arduino library for receiving and decode 433 MHz data package of TFA Temp & Humidity Sensors
Author: Denxhun
Maintainer: Denxhun
Read the documentation
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
|
https://www.arduino.cc/reference/en/libraries/tfa-433-receiver/index.html
|
98ee0bf19105-1
|
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
0.1.1
(latest)
0.1.0
|
https://www.arduino.cc/reference/en/libraries/tfa-433-receiver/index.html
|
17c8dfa0a76b-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Ncecabbus
NceCabBus
Communication
Enables NCE Cab Bus Communication
This library allows you to interface to a NCE Cab Bus and send / receive commands.
Author: Alex Shepherd
Maintainer: Alex Shepherd
Read the documentation
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
0.3.0
|
https://www.arduino.cc/reference/en/libraries/ncecabbus/index.html
|
17c8dfa0a76b-1
|
the
Arduino IDE and install it from there.
0.3.0
(latest)
0.2.0
0.1.0
0.0.1
|
https://www.arduino.cc/reference/en/libraries/ncecabbus/index.html
|
bdb49b2d263b-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Tla2518
TLA2518
Signal Input/Output
Arduino library for Texas instrument TLA2518
Supports SPI
Author: David Lyckelid
Maintainer: David Lyckelid
Read the documentation
Go to repository
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.0.4
|
https://www.arduino.cc/reference/en/libraries/tla2518/index.html
|
bdb49b2d263b-1
|
the
Arduino IDE and install it from there.
1.0.4
(latest)
1.0.3
1.0.1
1.0.0
|
https://www.arduino.cc/reference/en/libraries/tla2518/index.html
|
563676693e52-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Sevensegmenttm1637
SevenSegmentTM1637
Display
Library for using a 4 digit seven segment display with TM1636 or TM1637 driver IC
|
https://www.arduino.cc/reference/en/libraries/sevensegmenttm1637/index.html
|
563676693e52-1
|
Extensive library for controlling a 4 digit seven segment display. This library inherent the Print class and uses the LCDAPI 1.0. For example you can use all normal Print methods like: print() and println(). From the LCDAPI among others begin(), clear(), home(), setCursor() and setBacklight() are implementend. On top of these regular functionality a segerate fun class which adds more features can be used. For example a bombtimer(), nightrider() and bouncingBall() method can be used when using the fun class.
Author: Bram Harmsen
Maintainer: Bram Harmsen
Read the documentation
Compatibility
This library is compatible with the avr
architecture so you
should be able to use it on the
following Arduino boards:
Arduino Micro
Arduino Leonardo
Arduino Mega
Arduino Nano
Arduino Uno
Arduino Yún
|
https://www.arduino.cc/reference/en/libraries/sevensegmenttm1637/index.html
|
563676693e52-2
|
Arduino Micro
Arduino Leonardo
Arduino Mega
Arduino Nano
Arduino Uno
Arduino Yún
Compatibility Note
Note: while the library is supposed to compile correctly on these architectures,
it might require specific hardware features that may be available only on some boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.1.0
(latest)
1.0.0
|
https://www.arduino.cc/reference/en/libraries/sevensegmenttm1637/index.html
|
24ef0121f7dc-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> M10lcd
M10LCD
Signal Input/Output
Library for LCD Interface
Use this library for LCD Interface.
Author: PulseRain
Maintainer: PulseRain
Read the documentation
Compatibility
This library is compatible with the FP51
architecture.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.0.1
(latest)
1.0.0
|
https://www.arduino.cc/reference/en/libraries/m10lcd/index.html
|
811f4d0b3280-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Cardinal
Cardinal
Data Processing
An Arduino library that takes input in degrees and output a string or integer for the 4, 8, 16, or 32 compass headings (like North, South, East, and West).
|
https://www.arduino.cc/reference/en/libraries/cardinal/index.html
|
811f4d0b3280-1
|
Cardinal is an Arduino library that takes input in degrees and output a string or integer for the 4, 8, 16, or 32 compass headings (like North, South, East, and West). It also makes available environment variables for the minimum, maximum, and middle azimuth of all of the 32 directions. It works fantastically when paired with a magnetometer.
Author: Perry Naseck (DaAwesomeP)
Maintainer: Perry Naseck (DaAwesomeP)
Read the documentation
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.0.2
(latest)
1.0.0
|
https://www.arduino.cc/reference/en/libraries/cardinal/index.html
|
31fb85141c99-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Arduino opl2
Arduino OPL2
Device Control
Use this library to control the OPL2 Audio Board or OPL3 Duo!
This library works with the OPL2 Audio Board and OPL3 Duo! board found on Tindie. You can use it to compose and play music and sounds through the YM3812 or YMF262 synthesizer chips.
Author: Maarten Janssen
Maintainer: Maarten Janssen
Read the documentation
Go to repository
Compatibility
|
https://www.arduino.cc/reference/en/libraries/arduino-opl2/index.html
|
31fb85141c99-1
|
Maintainer: Maarten Janssen
Read the documentation
Go to repository
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
2.1.2
(latest)
2.1.1
2.1.0
2.0.5
2.0.4
2.0.3
2.0.2
2.0.1
2.0.0
1.5.3
1.5.2
1.5.1
1.5.0
1.4.7
1.4.6
1.4.5
1.4.4
1.4.3
1.4.2
1.4.1
|
https://www.arduino.cc/reference/en/libraries/arduino-opl2/index.html
|
31fb85141c99-2
|
1.4.3
1.4.2
1.4.1
1.4.0
1.2.3
1.2.2
|
https://www.arduino.cc/reference/en/libraries/arduino-opl2/index.html
|
ccc5ebc5e06c-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Pushdata esp8266 ssl
Pushdata_ESP8266_SSL
Communication
Free, ultra-simple time series data storage for your IoT sensors
Pushdata.io client library that makes it very simple to store your time series data online
Author: Ragnar Lonn
Maintainer: Ragnar Lonn
Read the documentation
Go to repository
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
|
https://www.arduino.cc/reference/en/libraries/pushdata_esp8266_ssl/index.html
|
ccc5ebc5e06c-1
|
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
0.0.9
(latest)
0.0.8
0.0.7
0.0.6
0.0.5
|
https://www.arduino.cc/reference/en/libraries/pushdata_esp8266_ssl/index.html
|
e4588a517eb2-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Acesegment
AceSegment
Signal Input/Output
Library for rendering seven segment LED modules using the TM1637, TM1638, MAX7219, HT16K33, or 74HC595 controller chips.
Hardware-dependent code is separated from the hardware-agnostic code so that applications can support different LED modules with minimal changes. Various writer classes provide rendering of numbers, temperature, clock digits, and strings. Brightness control is available on most LED modules. Some LED modules support brightness on a per-digit basis.
Author: Brian T. Park
|
https://www.arduino.cc/reference/en/libraries/acesegment/index.html
|
e4588a517eb2-1
|
Author: Brian T. Park
Maintainer: Brian T. Park
Read the documentation
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
0.13.0
(latest)
0.12.0
0.11.0
0.10.0
0.9.1
0.9.0
0.8.2
0.8.1
0.8.0
0.7.0
0.6.0
0.5.0
0.4.0
0.3.0
0.2.0
0.1.0
|
https://www.arduino.cc/reference/en/libraries/acesegment/index.html
|
96993d254ab5-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Dfplayermini
DFPlayerMini
Device Control
A reliable, responsive and compact driver for DFPlayer Mini sound module for Arduino.
It guarantees stability and responsiveness, due to respecting the two-way communication protocol with the module, taking care of required wait cycles, and letting you do your own stuff while waiting. It does not require interrupts or multithreading, because if you use the whileBusyMethod callback wisely, you will be able to achieve great responsiveness.
Author: Arsen Torbarina
Maintainer: Arsen Torbarina
Read the documentation
Compatibility
|
https://www.arduino.cc/reference/en/libraries/dfplayermini/index.html
|
96993d254ab5-1
|
Maintainer: Arsen Torbarina
Read the documentation
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.0.0
(latest)
|
https://www.arduino.cc/reference/en/libraries/dfplayermini/index.html
|
d70f5bb794d1-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Ps2dev
ps2dev
Communication
Library to emulate PS2 keyboard/mouse using arduino
Library to emulate PS2 keyboard/mouse using arduino. In this version i've fixed timing to improve reliability. I've integrated some keyboard protocol basics directly to library, so user don't need to do that. I plan the same for mouse protocol. API is still subject to change in future, because i want to make it bit more convenient to use. Also i plan to add some rudimentary interrupt driven mode as optional feature.
Author: Chris J. Kiick
|
https://www.arduino.cc/reference/en/libraries/ps2dev/index.html
|
d70f5bb794d1-1
|
Author: Chris J. Kiick
Maintainer: Tomas Mudrunka
Read the documentation
Go to repository
Compatibility
This library is compatible with the avr
architecture so you
should be able to use it on the
following Arduino boards:
Arduino Micro
Arduino Leonardo
Arduino Mega
Arduino Nano
Arduino Uno
Arduino Yún
Compatibility Note
Note: while the library is supposed to compile correctly on these architectures,
it might require specific hardware features that may be available only on some boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
0.0.4
(latest)
0.0.3
0.0.2
0.0.1
|
https://www.arduino.cc/reference/en/libraries/ps2dev/index.html
|
d254318cc95c-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Toneesp32
ToneESP32
Signal Input/Output
Tone library for ESP32
Uses ledc channel to put a tone signal onto a specific pin
Author: Larry Bernstone
Maintainer: Larry Bernstone
Read the documentation
Go to repository
Compatibility
This library is compatible with the esp32
architecture.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.0.0
(latest)
|
https://www.arduino.cc/reference/en/libraries/toneesp32/index.html
|
ed0cef25f1f2-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Ibot
IBot
Other
Arduino library for I-Bot camp.
Sensor library was removed.
Author: Robot Club KMITL Thailand
Maintainer: Phanuphong Thanatkha
Read the documentation
Go to repository
Compatibility
This library is compatible with the avr
architecture so you
should be able to use it on the
following Arduino boards:
Arduino Micro
Arduino Leonardo
Arduino Mega
Arduino Nano
Arduino Uno
Arduino Yún
Compatibility Note
|
https://www.arduino.cc/reference/en/libraries/ibot/index.html
|
ed0cef25f1f2-1
|
Arduino Leonardo
Arduino Mega
Arduino Nano
Arduino Uno
Arduino Yún
Compatibility Note
Note: while the library is supposed to compile correctly on these architectures,
it might require specific hardware features that may be available only on some boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.3.0
(latest)
1.2.0
|
https://www.arduino.cc/reference/en/libraries/ibot/index.html
|
3e05fff6817a-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Max17048
MAX17048
Device Control
Arduino library for MAX17048/MAX17049 1-Cell/2-Cell Fuel Gauge with ModelGauge
Author: hideakitai
Maintainer: hideakitai
Read the documentation
Go to repository
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
0.1.0
(latest)
|
https://www.arduino.cc/reference/en/libraries/max17048/index.html
|
4fd0844efe6a-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Tinydatabase arduino
TinyDatabase_Arduino
Data Storage
A tiny database to manipulate EEPROM easily
This library is an encapsualtion to use internal EEPROM of arduino like a SQL data base with its queries. It built by Tawaliou, Engineer at YoupiLab.
Author: Tawaliou ALAO
Maintainer: Tawaliou, YoupiLab
Read the documentation
Compatibility
This library is compatible with the avr
architecture so you
should be able to use it on the
following Arduino boards:
|
https://www.arduino.cc/reference/en/libraries/tinydatabase_arduino/index.html
|
4fd0844efe6a-1
|
should be able to use it on the
following Arduino boards:
Arduino Micro
Arduino Leonardo
Arduino Mega
Arduino Nano
Arduino Uno
Arduino Yún
Compatibility Note
Note: while the library is supposed to compile correctly on these architectures,
it might require specific hardware features that may be available only on some boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.0.2
(latest)
1.0.1
1.0.0
|
https://www.arduino.cc/reference/en/libraries/tinydatabase_arduino/index.html
|
bf5189b60412-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Curseddoublelinkedlistinterface
CursedDoubleLinkedListInterface
Display
Cursed Double Linked List Interface with previous/next pointers for C++ and Arduino.
Install this library interface if you want to use it for linked lists
Author: sorek.uk
Maintainer: sorek
Read the documentation
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
|
https://www.arduino.cc/reference/en/libraries/curseddoublelinkedlistinterface/index.html
|
bf5189b60412-1
|
the
Arduino IDE and install it from there.
1.0.3
(latest)
1.0.2
1.0.1
1.0.0
|
https://www.arduino.cc/reference/en/libraries/curseddoublelinkedlistinterface/index.html
|
3466af2af7cf-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Radar
RADAR
Other
Arduino library for a pan tilt radar.
Experimental
Author: Rob Tillaart
Maintainer: Rob Tillaart
Read the documentation
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
0.1.7
(latest)
0.1.6
0.1.5
|
https://www.arduino.cc/reference/en/libraries/radar/index.html
|
3466af2af7cf-1
|
(latest)
0.1.6
0.1.5
0.1.4
0.1.3
|
https://www.arduino.cc/reference/en/libraries/radar/index.html
|
09bae8b1445e-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> 107 arduino debug
107-Arduino-Debug
Other
Arduino library for providing convenient macros for printf-style debugging.
Author: Alexander Entinger
Maintainer: Alexander Entinger
Read the documentation
Compatibility
This library is compatible with the samd, esp32, mbed, mbed_nano, mbed_portenta, mbed_edge, rp2040
architectures so you
should be able to use it on the
following Arduino boards:
Arduino MKR FOX 1200
Arduino MKR GSM 1400
Arduino MKR NB 1500
|
https://www.arduino.cc/reference/en/libraries/107-arduino-debug/index.html
|
09bae8b1445e-1
|
Arduino MKR GSM 1400
Arduino MKR NB 1500
Arduino MKR VIDOR 4000
Arduino MKR WAN 1300 (LoRa connectivity)
Arduino MKR WAN 1310
Arduino MKR WiFi 1010
Arduino MKR ZERO (I2S bus & SD for sound, music & digital audio data)
Arduino MKR1000 WIFI
Arduino Nano 33 BLE
Arduino Nano 33 IoT
Arduino Zero
Portenta H7
Compatibility Note
Note: while the library is supposed to compile correctly on these architectures,
it might require specific hardware features that may be available only on some boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.2.0
(latest)
1.1.6
1.1.5
1.1.4
|
https://www.arduino.cc/reference/en/libraries/107-arduino-debug/index.html
|
09bae8b1445e-2
|
1.1.6
1.1.5
1.1.4
1.1.3
1.1.2
1.1.1
1.1.0
1.0.1
1.0.0
|
https://www.arduino.cc/reference/en/libraries/107-arduino-debug/index.html
|
9d0b9967210f-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Led dithering
LED Dithering
Signal Input/Output
Adjustable LED brightness on every IO pin with software-controlled blinking
This hack implements controllable LED brightness by quickly performing a CPU-controlled blinking. Timming doesn't have to be accurate, and delays are automatiicaly compensated for.
Author: Paulo Costa
Maintainer: Paulo Costa
Read the documentation
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
|
https://www.arduino.cc/reference/en/libraries/led-dithering/index.html
|
9d0b9967210f-1
|
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.0.0
(latest)
|
https://www.arduino.cc/reference/en/libraries/led-dithering/index.html
|
41336114b62b-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> M5 dlight
M5-DLight
Device Control
Library for M5Stack Unit & HAT DLight
See more on https://docs.m5stack.com/en/unit/dlight or https://docs.m5stack.com/en/hat/hat_dlight
Author: M5Stack
Maintainer: M5Stack
Read the documentation
Compatibility
This library is compatible with the esp32
architecture.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
|
https://www.arduino.cc/reference/en/libraries/m5-dlight/index.html
|
41336114b62b-1
|
the
Arduino IDE and install it from there.
0.0.3
(latest)
0.0.1
|
https://www.arduino.cc/reference/en/libraries/m5-dlight/index.html
|
bff1310c58aa-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Absolutemouse
AbsoluteMouse
Device Control
Arduino library to control cursor over USB, using absolute positioning.
Implements V-USB to provide software emulation of either USB mouse or stylus.
Author: Todd Herbert
Maintainer: Todd Herbert
Read the documentation
Compatibility
This library is compatible with the avr
architecture so you
should be able to use it on the
following Arduino boards:
Arduino Micro
Arduino Leonardo
Arduino Mega
Arduino Nano
Arduino Uno
Arduino Yún
Compatibility Note
|
https://www.arduino.cc/reference/en/libraries/absolutemouse/index.html
|
bff1310c58aa-1
|
Arduino Leonardo
Arduino Mega
Arduino Nano
Arduino Uno
Arduino Yún
Compatibility Note
Note: while the library is supposed to compile correctly on these architectures,
it might require specific hardware features that may be available only on some boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
0.1.0
(latest)
|
https://www.arduino.cc/reference/en/libraries/absolutemouse/index.html
|
0ec23530d0b8-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Stm32duino proximity gesture
STM32duino Proximity Gesture
Device Control
Allows performing simple gestures detection using proximity sensors
This library provides single swipe gesture detection, directional (left/right) swipe gesture detection and single tap gesture detection.
Author: AST
Maintainer: stm32duino
Read the documentation
Compatibility
This library is compatible with the stm32, avr, sam
architectures so you
should be able to use it on the
following Arduino boards:
Arduino Micro
Arduino Leonardo
Arduino Mega
Arduino Due
Arduino Nano
|
https://www.arduino.cc/reference/en/libraries/stm32duino-proximity-gesture/index.html
|
0ec23530d0b8-1
|
Arduino Micro
Arduino Leonardo
Arduino Mega
Arduino Due
Arduino Nano
Arduino Uno
Arduino Yún
Compatibility Note
Note: while the library is supposed to compile correctly on these architectures,
it might require specific hardware features that may be available only on some boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.0.5
(latest)
1.0.4
1.0.3
1.0.2
1.0.1
1.0.0
|
https://www.arduino.cc/reference/en/libraries/stm32duino-proximity-gesture/index.html
|
03bdca10ea3e-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> Adafruit nrfcrypto
Adafruit nRFCrypto
Data Processing
Arduino Cryptography library using hardware-accelerated ARM CryptoCell CC310 on nRF52-based Adafruit Bluefruit LE modules
Author: Adafruit
Maintainer: Adafruit
Read the documentation
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
0.1.0
(latest)
|
https://www.arduino.cc/reference/en/libraries/adafruit-nrfcrypto/index.html
|
03bdca10ea3e-1
|
0.1.0
(latest)
0.0.7
0.0.6
0.0.5
0.0.4
0.0.3
0.0.1
|
https://www.arduino.cc/reference/en/libraries/adafruit-nrfcrypto/index.html
|
b4f2e2674cd2-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Find anything that can be improved? Suggest corrections and new documentation via GitHub.
Doubts on how to use Github? Learn everything you need to know in this tutorial.
Reference
> Libraries
> M5 ads1115
M5-ADS1115
Device Control
Library for Unit Ameter & Vmeter
See more on https://docs.m5stack.com/en/unit/ameter or https://docs.m5stack.com/en/unit/vmeter
Author: M5Stack
Maintainer: M5Stack
Read the documentation
Compatibility
This library is compatible with the esp32
architecture.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
|
https://www.arduino.cc/reference/en/libraries/m5-ads1115/index.html
|
b4f2e2674cd2-1
|
the
Arduino IDE and install it from there.
0.0.2
(latest)
0.0.1
|
https://www.arduino.cc/reference/en/libraries/m5-ads1115/index.html
|
712d89758a75-0
|
Language
functions
variables
structure
Libraries
IoT Cloud API
Glossary
Reference
> Libraries
> Arduino lsm6dsox
Arduino_LSM6DSOX
Sensors
Allows you to read the accelerometer and gyroscope values from the LSM6DSOX IMU on your Arduino Nano RP2040 Connect.
Compatibility
This library is compatible with all architectures so you should be able to use
it on all the Arduino
boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
1.1.2
(latest)
1.1.1
1.1.0
1.0.0
Usage
|
https://www.arduino.cc/reference/en/libraries/arduino_lsm6dsox/index.html
|
712d89758a75-1
|
1.1.1
1.1.0
1.0.0
Usage
The ArduinoLSM6DSOX library allows you to use the inertial measurement unit (IMU) available on the Arduino® Nano RP2040 Connect board. The IMU is a LSM6DSOX, it is a 3-axis accelerometer and 3-axis gyroscope. The IMU is connected to the Nano RP2040 Connect board’s microcontroller through I2C. The values returned are signed floats.
To use this library:
#include <Arduino_LSM6DSOX.h>
The ArduinoLSM6DSOX library takes care of the sensor initialization and sets its values as follows:
Accelerometer range is set at ±4 g with a resolution of 0.122 mg.
Gyroscope range is set at ±2000 dps with a resolution of 70 mdps.
|
https://www.arduino.cc/reference/en/libraries/arduino_lsm6dsox/index.html
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.