instruction
stringlengths 55
56
| inputs
stringclasses 1
value | outputs
stringlengths 86
4.06k
|
|---|---|---|
Please provide detailed information about CVE-2021-1211
|
CVE:CVE-2021-1211
Description:Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
published:2021-01-13T22:15:19.787
|
|
Please provide detailed information about CVE-2021-1212
|
CVE:CVE-2021-1212
Description:Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
published:2021-01-13T22:15:19.863
|
|
Please provide detailed information about CVE-2021-1213
|
CVE:CVE-2021-1213
Description:Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
published:2021-01-13T22:15:19.927
|
|
Please provide detailed information about CVE-2021-1214
|
CVE:CVE-2021-1214
Description:Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
published:2021-01-13T22:15:20.007
|
|
Please provide detailed information about CVE-2021-1215
|
CVE:CVE-2021-1215
Description:Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
published:2021-01-13T22:15:20.083
|
|
Please provide detailed information about CVE-2021-1216
|
CVE:CVE-2021-1216
Description:Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
published:2021-01-13T22:15:20.177
|
|
Please provide detailed information about CVE-2021-1217
|
CVE:CVE-2021-1217
Description:Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
published:2021-01-13T22:15:20.257
|
|
Please provide detailed information about CVE-2021-1223
|
CVE:CVE-2021-1223
Description:Multiple Cisco products are affected by a vulnerability in the Snort detection engine that could allow an unauthenticated, remote attacker to bypass a configured file policy for HTTP. The vulnerability is due to incorrect handling of an HTTP range header. An attacker could exploit this vulnerability by sending crafted HTTP packets through an affected device. A successful exploit could allow the attacker to bypass configured file policy for HTTP packets and deliver a malicious payload.
published:2021-01-13T22:15:20.317
|
|
Please provide detailed information about CVE-2021-1224
|
CVE:CVE-2021-1224
Description:Multiple Cisco products are affected by a vulnerability with TCP Fast Open (TFO) when used in conjunction with the Snort detection engine that could allow an unauthenticated, remote attacker to bypass a configured file policy for HTTP. The vulnerability is due to incorrect detection of the HTTP payload if it is contained at least partially within the TFO connection handshake. An attacker could exploit this vulnerability by sending crafted TFO packets with an HTTP payload through an affected device. A successful exploit could allow the attacker to bypass configured file policy for HTTP packets and deliver a malicious payload.
published:2021-01-13T22:15:20.410
|
|
Please provide detailed information about CVE-2021-1226
|
CVE:CVE-2021-1226
Description:A vulnerability in the audit logging component of Cisco Unified Communications Manager, Cisco Unified Communications Manager Session Management Edition, Cisco Unified Communications Manager IM & Presence Service, Cisco Unity Connection, Cisco Emergency Responder, and Cisco Prime License Manager could allow an authenticated, remote attacker to view sensitive information in clear text on an affected system. The vulnerability is due to the storage of certain unencrypted credentials. An attacker could exploit this vulnerability by accessing the audit logs on an affected system and obtaining credentials that they may not normally have access to. A successful exploit could allow the attacker to use those credentials to discover and manage network devices.
published:2021-01-13T22:15:20.490
|
|
Please provide detailed information about CVE-2021-1236
|
CVE:CVE-2021-1236
Description:Multiple Cisco products are affected by a vulnerability in the Snort application detection engine that could allow an unauthenticated, remote attacker to bypass the configured policies on an affected system. The vulnerability is due to a flaw in the detection algorithm. An attacker could exploit this vulnerability by sending crafted packets that would flow through an affected system. A successful exploit could allow the attacker to bypass the configured policies and deliver a malicious payload to the protected network.
published:2021-01-13T22:15:20.583
|
|
Please provide detailed information about CVE-2021-1237
|
CVE:CVE-2021-1237
Description:A vulnerability in the Network Access Manager and Web Security Agent components of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to perform a DLL injection attack. To exploit this vulnerability, the attacker would need to have valid credentials on the Windows system. The vulnerability is due to insufficient validation of resources that are loaded by the application at run time. An attacker could exploit this vulnerability by inserting a configuration file in a specific path in the system which, in turn, causes a malicious DLL file to be loaded when the application starts. A successful exploit could allow the attacker to execute arbitrary code on the affected machine with SYSTEM privileges.
published:2021-01-13T22:15:20.677
|
|
Please provide detailed information about CVE-2021-1238
|
CVE:CVE-2021-1238
Description:Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface of an affected system. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input. An attacker could exploit these vulnerabilities by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.
published:2021-01-13T22:15:20.757
|
|
Please provide detailed information about CVE-2021-1239
|
CVE:CVE-2021-1239
Description:Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface of an affected system. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input. An attacker could exploit these vulnerabilities by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.
published:2021-01-13T22:15:20.817
|
|
Please provide detailed information about CVE-2021-1240
|
CVE:CVE-2021-1240
Description:A vulnerability in the loading process of specific DLLs in Cisco Proximity Desktop for Windows could allow an authenticated, local attacker to load a malicious library. To exploit this vulnerability, the attacker must have valid credentials on the Windows system. This vulnerability is due to incorrect handling of directory paths at run time. An attacker could exploit this vulnerability by placing a malicious DLL file in a specific location on the targeted system. This file will execute when the vulnerable application launches. A successful exploit could allow the attacker to execute arbitrary code on the targeted system with the privileges of another user’s account.
published:2021-01-13T22:15:20.897
|
|
Please provide detailed information about CVE-2021-1242
|
CVE:CVE-2021-1242
Description:A vulnerability in Cisco Webex Teams could allow an unauthenticated, remote attacker to manipulate file names within the messaging interface. The vulnerability exists because the affected software mishandles character rendering. An attacker could exploit this vulnerability by sharing a file within the application interface. A successful exploit could allow the attacker to modify how the shared file name displays within the interface, which could allow the attacker to conduct phishing or spoofing attacks.
published:2021-01-13T22:15:20.990
|
|
Please provide detailed information about CVE-2021-1245
|
CVE:CVE-2021-1245
Description:Cisco Finesse and Cisco Unified CVP OpenSocial Gadget Editor Cross-Site Scripting Vulnerability
A vulnerability in the web-based management interface of Cisco Finesse and Cisco Unified CVP could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface.
The vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive, browser-based information.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
published:2021-01-13T22:15:21.083
|
|
Please provide detailed information about CVE-2021-1246
|
CVE:CVE-2021-1246
Description:Cisco Finesse, Cisco Virtualized Voice Browser, and Cisco Unified CVP OpenSocial Gadget Editor Unauthenticated Access Vulnerability
A vulnerability in the web management interface of Cisco Finesse, Cisco Virtualized Voice Browser, and Cisco Unified CVP could allow an unauthenticated, remote attacker to access the OpenSocial Gadget Editor without providing valid user credentials.
The vulnerability is due to missing authentication for a specific section of the web-based management interface. An attacker could exploit this vulnerability by accessing a crafted URL. A successful exploit could allow the attacker to obtain access to a section of the interface, which they could use to obtain potentially confidential information and create arbitrary XML files.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
published:2021-01-13T22:15:21.193
|
|
Please provide detailed information about CVE-2021-1258
|
CVE:CVE-2021-1258
Description:A vulnerability in the upgrade component of Cisco AnyConnect Secure Mobility Client could allow an authenticated, local attacker with low privileges to read arbitrary files on the underlying operating system (OS) of an affected device. The vulnerability is due to insufficient file permission restrictions. An attacker could exploit this vulnerability by sending a crafted command from the local CLI to the application. A successful exploit could allow the attacker to read arbitrary files on the underlying OS of the affected device. The attacker would need to have valid user credentials to exploit this vulnerability.
published:2021-01-13T22:15:21.287
|
|
Please provide detailed information about CVE-2021-1267
|
CVE:CVE-2021-1267
Description:A vulnerability in the dashboard widget of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper restrictions on XML entities. An attacker could exploit this vulnerability by crafting an XML-based widget on an affected server. A successful exploit could cause increased memory and CPU utilization, which could result in a DoS condition.
published:2021-01-13T22:15:21.380
|
|
Please provide detailed information about CVE-2021-1307
|
CVE:CVE-2021-1307
Description:Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
published:2021-01-13T22:15:21.473
|
|
Please provide detailed information about CVE-2021-1310
|
CVE:CVE-2021-1310
Description:A vulnerability in the web-based management interface of Cisco Webex Meetings could allow an unauthenticated, remote attacker to redirect a user to an untrusted web page, bypassing the warning mechanism that should prompt the user before the redirection. This vulnerability is due to improper input validation of the URL parameters in an HTTP request. An attacker could exploit this vulnerability by persuading a user to click a crafted link. A successful exploit could allow the attacker to redirect a user to a malicious website, bypassing the Webex URL check that should result in a warning before the redirection to the web page. Attackers may use this type of vulnerability, known as an open redirect attack, as part of a phishing attack to convince users to unknowingly visit malicious sites.
published:2021-01-13T22:15:21.553
|
|
Please provide detailed information about CVE-2021-1311
|
CVE:CVE-2021-1311
Description:A vulnerability in the reclaim host role feature of Cisco Webex Meetings and Cisco Webex Meetings Server could allow an authenticated, remote attacker to take over the host role during a meeting. This vulnerability is due to a lack of protection against brute forcing of the host key. An attacker could exploit this vulnerability by sending crafted requests to a vulnerable Cisco Webex Meetings or Webex Meetings Server site. A successful exploit would require the attacker to have access to join a Webex meeting, including applicable meeting join links and passwords. A successful exploit could allow the attacker to acquire or take over the host role for a meeting.
published:2021-01-13T22:15:21.630
|
|
Please provide detailed information about CVE-2021-1360
|
CVE:CVE-2021-1360
Description:Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
published:2021-01-13T22:15:21.723
|
|
Please provide detailed information about CVE-2021-21006
|
CVE:CVE-2021-21006
Description:Adobe Photoshop version 22.1 (and earlier) is affected by a heap buffer overflow vulnerability when handling a specially crafted font file. Successful exploitation could lead to arbitrary code execution. Exploitation of this issue requires user interaction in that a victim must open a malicious file.
published:2021-01-13T23:15:13.883
|
|
Please provide detailed information about CVE-2021-21007
|
CVE:CVE-2021-21007
Description:Adobe Illustrator version 25.0 (and earlier) is affected by an uncontrolled search path element that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.
published:2021-01-13T23:15:13.963
|
|
Please provide detailed information about CVE-2021-21008
|
CVE:CVE-2021-21008
Description:Adobe Animate version 21.0 (and earlier) is affected by an uncontrolled search path element that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.
published:2021-01-13T23:15:14.057
|
|
Please provide detailed information about CVE-2021-21009
|
CVE:CVE-2021-21009
Description:Adobe Campaign Classic Gold Standard 10 (and earlier), 20.3.1 (and earlier), 20.2.3 (and earlier), 20.1.3 (and earlier), 19.2.3 (and earlier) and 19.1.7 (and earlier) are affected by a server-side request forgery (SSRF) vulnerability. Successful exploitation could allow an attacker to use the Campaign instance to issue unauthorized requests to internal or external resources.
published:2021-01-13T23:15:14.133
|
|
Please provide detailed information about CVE-2021-21010
|
CVE:CVE-2021-21010
Description:InCopy version 15.1.1 (and earlier) for Windows is affected by an uncontrolled search path vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.
published:2021-01-13T23:15:14.213
|
|
Please provide detailed information about CVE-2021-21011
|
CVE:CVE-2021-21011
Description:Adobe Captivate 2019 version 11.5.1.499 (and earlier) is affected by an uncontrolled search path element vulnerability that could lead to privilege escalation. An attacker with permissions to write to the file system could leverage this vulnerability to escalate privileges.
published:2021-01-13T23:15:14.337
|
|
Please provide detailed information about CVE-2021-21012
|
CVE:CVE-2021-21012
Description:Magento versions 2.4.1 (and earlier), 2.4.0-p1 (and earlier) and 2.3.6 (and earlier) are vulnerable to an insecure direct object vulnerability (IDOR) in the checkout module. Successful exploitation could lead to sensitive information disclosure.
published:2021-01-13T23:15:14.400
|
|
Please provide detailed information about CVE-2021-21013
|
CVE:CVE-2021-21013
Description:Magento versions 2.4.1 (and earlier), 2.4.0-p1 (and earlier) and 2.3.6 (and earlier) are vulnerable to an insecure direct object vulnerability (IDOR) in the customer API module. Successful exploitation could lead to sensitive information disclosure and update arbitrary information on another user's account.
published:2021-01-13T23:15:14.493
|
|
Please provide detailed information about CVE-2021-3138
|
CVE:CVE-2021-3138
Description:In Discourse 2.7.0 through beta1, a rate-limit bypass leads to a bypass of the 2FA requirement for certain forms.
published:2021-01-14T04:15:15.073
|
|
Please provide detailed information about CVE-2021-20617
|
CVE:CVE-2021-20617
Description:Improper access control vulnerability in acmailer ver. 4.0.1 and earlier, and acmailer DB ver. 1.1.3 and earlier allows remote attackers to execute an arbitrary OS command, or gain an administrative privilege which may result in obtaining the sensitive information on the server via unspecified vectors.
published:2021-01-14T09:15:13.367
|
|
Please provide detailed information about CVE-2021-20618
|
CVE:CVE-2021-20618
Description:Privilege chaining vulnerability in acmailer ver. 4.0.2 and earlier, and acmailer DB ver. 1.1.4 and earlier allows remote attackers to bypass authentication and to gain an administrative privilege which may result in obtaining the sensitive information on the server via unspecified vectors.
published:2021-01-14T09:15:13.740
|
|
Please provide detailed information about CVE-2021-23926
|
CVE:CVE-2021-23926
Description:The XML parsers used by XMLBeans up to version 2.6.0 did not set the properties needed to protect the user from malicious XML input. Vulnerabilities include possibilities for XML Entity Expansion attacks. Affects XMLBeans up to and including v2.6.0.
published:2021-01-14T15:15:13.337
|
|
Please provide detailed information about CVE-2021-24122
|
CVE:CVE-2021-24122
Description:When serving resources from a network location using the NTFS file system, Apache Tomcat versions 10.0.0-M1 to 10.0.0-M9, 9.0.0.M1 to 9.0.39, 8.5.0 to 8.5.59 and 7.0.0 to 7.0.106 were susceptible to JSP source code disclosure in some configurations. The root cause was the unexpected behaviour of the JRE API File.getCanonicalPath() which in turn was caused by the inconsistent behaviour of the Windows API (FindFirstFileW) in some circumstances.
published:2021-01-14T15:15:13.400
|
|
Please provide detailed information about CVE-2021-21722
|
CVE:CVE-2021-21722
Description:A ZTE Smart STB is impacted by an information leak vulnerability. The device did not fully verify the log, so attackers could use this vulnerability to obtain sensitive user information for further information detection and attacks. This affects: ZXV10 B860A V2.1-T_V0032.1.1.04_jiangsuTelecom.
published:2021-01-14T16:15:19.053
|
|
Please provide detailed information about CVE-2021-21261
|
CVE:CVE-2021-21261
Description:Flatpak is a system for building, distributing, and running sandboxed desktop applications on Linux. A bug was discovered in the `flatpak-portal` service that can allow sandboxed applications to execute arbitrary code on the host system (a sandbox escape). This sandbox-escape bug is present in versions from 0.11.4 and before fixed versions 1.8.5 and 1.10.0. The Flatpak portal D-Bus service (`flatpak-portal`, also known by its D-Bus service name `org.freedesktop.portal.Flatpak`) allows apps in a Flatpak sandbox to launch their own subprocesses in a new sandbox instance, either with the same security settings as the caller or with more restrictive security settings. For example, this is used in Flatpak-packaged web browsers such as Chromium to launch subprocesses that will process untrusted web content, and give those subprocesses a more restrictive sandbox than the browser itself. In vulnerable versions, the Flatpak portal service passes caller-specified environment variables to non-sandboxed processes on the host system, and in particular to the `flatpak run` command that is used to launch the new sandbox instance. A malicious or compromised Flatpak app could set environment variables that are trusted by the `flatpak run` command, and use them to execute arbitrary code that is not in a sandbox. As a workaround, this vulnerability can be mitigated by preventing the `flatpak-portal` service from starting, but that mitigation will prevent many Flatpak apps from working correctly. This is fixed in versions 1.8.5 and 1.10.0.
published:2021-01-14T20:15:12.360
|
|
Please provide detailed information about CVE-2021-22132
|
CVE:CVE-2021-22132
Description:Elasticsearch versions 7.7.0 to 7.10.1 contain an information disclosure flaw in the async search API. Users who execute an async search will improperly store the HTTP headers. An Elasticsearch user with the ability to read the .tasks index could obtain sensitive request headers of other users in the cluster. This issue is fixed in Elasticsearch 7.10.2
published:2021-01-14T20:15:13.407
|
|
Please provide detailed information about CVE-2021-23835
|
CVE:CVE-2021-23835
Description:An issue was discovered in flatCore before 2.0.0 build 139. A local file disclosure vulnerability was identified in the docs_file HTTP request body parameter for the acp interface. This can be exploited with admin access rights. The affected parameter (which retrieves the contents of the specified file) was found to be accepting malicious user input without proper sanitization, thus leading to retrieval of backend server sensitive files, e.g., /etc/passwd, SQLite database files, PHP source code, etc.
published:2021-01-15T07:15:13.970
|
|
Please provide detailed information about CVE-2021-23836
|
CVE:CVE-2021-23836
Description:An issue was discovered in flatCore before 2.0.0 build 139. A stored XSS vulnerability was identified in the prefs_smtp_psw HTTP request body parameter for the acp interface. An admin user can inject malicious client-side script into the affected parameter without any form of input sanitization. The injected payload will be executed in the browser of a user whenever one visits the affected module page.
published:2021-01-15T07:15:14.033
|
|
Please provide detailed information about CVE-2021-23837
|
CVE:CVE-2021-23837
Description:An issue was discovered in flatCore before 2.0.0 build 139. A time-based blind SQL injection was identified in the selected_folder HTTP request body parameter for the acp interface. The affected parameter (which retrieves the file contents of the specified folder) was found to be accepting malicious user input without proper sanitization, thus leading to SQL injection. Database related information can be successfully retrieved.
published:2021-01-15T07:15:14.097
|
|
Please provide detailed information about CVE-2021-23838
|
CVE:CVE-2021-23838
Description:An issue was discovered in flatCore before 2.0.0 build 139. A reflected XSS vulnerability was identified in the media_filter HTTP request body parameter for the acp interface. The affected parameter accepts malicious client-side script without proper input sanitization. For example, a malicious user can leverage this vulnerability to steal cookies from a victim user and perform a session-hijacking attack, which may then lead to unauthorized access to the site.
published:2021-01-15T07:15:14.143
|
|
Please provide detailed information about CVE-2021-20189
|
CVE:CVE-2021-20189
Description:Rejected reason: DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue. Notes: none
published:2021-01-15T15:15:12.847
|
|
Please provide detailed information about CVE-2021-22166
|
CVE:CVE-2021-22166
Description:An attacker could cause a Prometheus denial of service in GitLab 13.7+ by sending an HTTP request with a malformed method
published:2021-01-15T16:15:13.217
|
|
Please provide detailed information about CVE-2021-22167
|
CVE:CVE-2021-22167
Description:An issue has been discovered in GitLab affecting all versions starting from 12.1. Incorrect headers in specific project page allows attacker to have a temporary read access to the private repository
published:2021-01-15T16:15:13.390
|
|
Please provide detailed information about CVE-2021-22168
|
CVE:CVE-2021-22168
Description:A regular expression denial of service issue has been discovered in NuGet API affecting all versions of GitLab starting from version 12.8.
published:2021-01-15T16:15:13.453
|
|
Please provide detailed information about CVE-2021-22171
|
CVE:CVE-2021-22171
Description:Insufficient validation of authentication parameters in GitLab Pages for GitLab 11.5+ allows an attacker to steal a victim's API token if they click on a maliciously crafted link
published:2021-01-15T16:15:13.517
|
|
Please provide detailed information about CVE-2021-0202
|
CVE:CVE-2021-0202
Description:On Juniper Networks MX Series and EX9200 Series platforms with Trio-based MPC (Modular Port Concentrator) where Integrated Routing and Bridging (IRB) interface is configured and it is mapped to a VPLS instance or a Bridge-Domain, certain network events at Customer Edge (CE) device may cause memory leak in the MPC which can cause an out of memory and MPC restarts. When this issue occurs, there will be temporary traffic interruption until the MPC is restored. An administrator can use the following CLI command to monitor the status of memory usage level of the MPC: user@device> show system resource-monitor fpc FPC Resource Usage Summary Free Heap Mem Watermark : 20 % Free NH Mem Watermark : 20 % Free Filter Mem Watermark : 20 % * - Watermark reached Slot # % Heap Free RTT Average RTT 1 87 PFE # % ENCAP mem Free % NH mem Free % FW mem Free 0 NA 88 99 1 NA 89 99 When the issue is occurring, the value of “% NH mem Free” will go down until the MPC restarts. This issue affects MX Series and EX9200 Series with Trio-based PFEs (Packet Forwarding Engines). Please refer to https://kb.juniper.net/KB25385 for the list of Trio-based PFEs. This issue affects Juniper Networks Junos OS on MX Series, EX9200 Series: 17.3R3-S8; 17.4R3-S2; 18.2R3-S4, 18.2R3-S5; 18.3R3-S2, 18.3R3-S3; 18.4 versions starting from 18.4R3-S1 and later versions prior to 18.4R3-S6; 19.2 versions starting from 19.2R2 and later versions prior to 19.2R3-S1; 19.4 versions starting from 19.4R2 and later versions prior to 19.4R2-S3, 19.4R3; 20.2 versions starting from 20.2R1 and later versions prior to 20.2R1-S3, 20.2R2. This issue does not affect Juniper Networks Junos OS: 18.1, 19.1, 19.3, 20.1.
published:2021-01-15T18:15:14.370
|
|
Please provide detailed information about CVE-2021-0203
|
CVE:CVE-2021-0203
Description:On Juniper Networks EX and QFX5K Series platforms configured with Redundant Trunk Group (RTG), Storm Control profile applied on the RTG interface might not take affect when it reaches the threshold condition. Storm Control enables the device to monitor traffic levels and to drop broadcast, multicast, and unknown unicast packets when a specified traffic level is exceeded, thus preventing packets from proliferating and degrading the LAN. Note: this issue does not affect EX2200, EX3300, EX4200, and EX9200 Series. This issue affects Juniper Networks Junos OS on EX Series and QFX5K Series: 15.1 versions prior to 15.1R7-S7; 16.1 versions prior to 16.1R7-S8; 17.2 versions prior to 17.2R3-S4; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S11, 17.4R3-S2; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R3-S5; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R2-S5, 18.4R3-S3; 19.1 versions prior to 19.1R2-S2, 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R2-S1, 19.2R3; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S1, 19.4R3; 20.1 versions prior to 20.1R1-S2, 20.1R2.
published:2021-01-15T18:15:14.543
|
|
Please provide detailed information about CVE-2021-0204
|
CVE:CVE-2021-0204
Description:A sensitive information disclosure vulnerability in delta-export configuration utility (dexp) of Juniper Networks Junos OS may allow a locally authenticated shell user the ability to create and read database files generated by the dexp utility, including password hashes of local users. Since dexp is shipped with setuid permissions enabled and is owned by the root user, this vulnerability may allow a local privileged user the ability to run dexp with root privileges and access sensitive information in the dexp database. This issue affects Juniper Networks Junos OS: 15.1 versions prior to 15.1R7-S8; 15.1X49 versions prior to 15.1X49-D230; 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.2X75 versions prior to 18.2X75-D34; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R2-S7, 18.4R3-S6; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S3; 19.2 versions prior to 19.2R1-S5, 19.2R3-S1; 19.3 versions prior to 19.3R2-S5, 19.3R3-S1; 19.4 versions prior to 19.4R1-S3, 19.4R2-S2, 19.4R3-S1; 20.1 versions prior to 20.1R1-S4, 20.1R2; 20.2 versions prior to 20.2R1-S2, 20.2R2.
published:2021-01-15T18:15:14.637
|
|
Please provide detailed information about CVE-2021-0205
|
CVE:CVE-2021-0205
Description:When the "Intrusion Detection Service" (IDS) feature is configured on Juniper Networks MX series with a dynamic firewall filter using IPv6 source or destination prefix, it may incorrectly match the prefix as /32, causing the filter to block unexpected traffic. This issue affects only IPv6 prefixes when used as source and destination. This issue affects MX Series devices using MS-MPC, MS-MIC or MS-SPC3 service cards with IDS service configured. This issue affects: Juniper Networks Junos OS 17.3 versions prior to 17.3R3-S10 on MX Series; 17.4 versions prior to 17.4R3-S3 on MX Series; 18.1 versions prior to 18.1R3-S11 on MX Series; 18.2 versions prior to 18.2R3-S6 on MX Series; 18.3 versions prior to 18.3R3-S4 on MX Series; 18.4 versions prior to 18.4R3-S6 on MX Series; 19.1 versions prior to 19.1R2-S2, 19.1R3-S3 on MX Series; 19.2 versions prior to 19.2R3-S1 on MX Series; 19.3 versions prior to 19.3R2-S5, 19.3R3-S1 on MX Series; 19.4 versions prior to 19.4R3 on MX Series; 20.1 versions prior to 20.1R2 on MX Series; 20.2 versions prior to 20.2R2 on MX Series;
published:2021-01-15T18:15:14.697
|
|
Please provide detailed information about CVE-2021-0206
|
CVE:CVE-2021-0206
Description:A NULL Pointer Dereference vulnerability in Juniper Networks Junos OS allows an attacker to send a specific packet causing the packet forwarding engine (PFE) to crash and restart, resulting in a Denial of Service (DoS). By continuously sending these specific packets, an attacker can repeatedly disable the PFE causing a sustained Denial of Service (DoS). This issue only affects Juniper Networks NFX Series, SRX Series platforms when SSL Proxy is configured. This issue affects Juniper Networks Junos OS on NFX Series and SRX Series: 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R3-S1; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3; 19.2 versions prior to 19.2R1-S2, 19.2R2; 19.3 versions prior to 19.3R2. This issue does not affect Juniper Networks Junos OS versions on NFX Series and SRX Series prior to 18.3R1.
published:2021-01-15T18:15:14.777
|
|
Please provide detailed information about CVE-2021-0207
|
CVE:CVE-2021-0207
Description:An improper interpretation conflict of certain data between certain software components within the Juniper Networks Junos OS devices does not allow certain traffic to pass through the device upon receipt from an ingress interface filtering certain specific types of traffic which is then being redirected to an egress interface on a different VLAN. This causes a Denial of Service (DoS) to those clients sending these particular types of traffic. Such traffic being sent by a client may appear genuine, but is non-standard in nature and should be considered as potentially malicious, and can be targeted to the device, or destined through it for the issue to occur. This issues affects IPv4 and IPv6 traffic. An indicator of compromise may be found by checking log files. You may find that traffic on the input interface has 100% of traffic flowing into the device, yet the egress interface shows 0 pps leaving the device. For example: [show interfaces "interface" statistics detail] Output between two interfaces would reveal something similar to: Ingress, first interface: -------------------- Interface Link Input packets (pps) Output packets (pps) et-0/0/0 Up 9999999999 (9999) 1 (0) -------------------- Egress, second interface: -------------------- Interface Link Input packets (pps) Output packets (pps) et-0/0/1 Up 0 (0) 9999999999 (0) -------------------- Dropped packets will not show up in DDoS monitoring/protection counters as issue is not caused by anti-DDoS protection mechanisms. This issue affects: Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S7 on NFX250, QFX5K Series, EX4600; 17.4 versions prior to 17.4R2-S11, 17.4R3-S3 on NFX250, QFX5K Series, EX4600; 18.1 versions prior to 18.1R3-S9 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4600; 18.2 versions prior to 18.2R3-S3 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600; 18.3 versions prior to 18.3R3-S1 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series; 18.4 versions prior to 18.4R1-S5, 18.4R2-S3, 18.4R3 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series; 19.1 versions prior to 19.1R1-S5, 19.1R2-S1, 19.1R3 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series; 19.2 versions prior to 19.2R1-S5, 19.2R2 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series; 19.3 versions prior to 19.3R2-S3, 19.3R3 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series; 19.4 versions prior to 19.4R1-S2, 19.4R2 on NFX250, NFX350, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series. This issue does not affect Junos OS releases prior to 17.2R2.
published:2021-01-15T18:15:14.840
|
|
Please provide detailed information about CVE-2021-0208
|
CVE:CVE-2021-0208
Description:An improper input validation vulnerability in the Routing Protocol Daemon (RPD) service of Juniper Networks Junos OS allows an attacker to send a malformed RSVP packet when bidirectional LSPs are in use, which when received by an egress router crashes the RPD causing a Denial of Service (DoS) condition. Continued receipt of the packet will sustain the Denial of Service. This issue affects: Juniper Networks Junos OS: All versions prior to 17.3R3-S10 except 15.1X49-D240 for SRX series; 17.4 versions prior to 17.4R3-S2; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R2-S7, 18.2R3-S4; 18.3 versions prior to 18.3R3-S2; 18.4 versions prior to 18.4R1-S8, 18.4R2-S6, 18.4R3-S2; 19.1 versions prior to 19.1R1-S5, 19.1R3-S3; 19.2 versions prior to 19.2R3; 19.3 versions prior to 19.3R2-S5, 19.3R3; 19.4 versions prior to 19.4R2-S2, 19.4R3-S1; 20.1 versions prior to 20.1R1-S4, 20.1R2; 15.1X49 versions prior to 15.1X49-D240 on SRX Series. Juniper Networks Junos OS Evolved: 19.3 versions prior to 19.3R2-S5-EVO; 19.4 versions prior to 19.4R2-S2-EVO; 20.1 versions prior to 20.1R1-S4-EVO.
published:2021-01-15T18:15:14.947
|
|
Please provide detailed information about CVE-2021-0209
|
CVE:CVE-2021-0209
Description:In Juniper Networks Junos OS Evolved an attacker sending certain valid BGP update packets may cause Junos OS Evolved to access an uninitialized pointer causing RPD to core leading to a Denial of Service (DoS). Continued receipt of these types of valid BGP update packets will cause an extended Denial of Service condition. RPD will require a restart to recover. An indicator of compromise is to see if the file rpd.re exists by issuing the command: show system core-dumps This issue affects: Juniper Networks Junos OS Evolved 19.4 versions prior to 19.4R2-S2-EVO; 20.1 versions prior to 20.1R1-S2-EVO, 20.1R2-S1-EVO. This issue does not affect Junos OS.
published:2021-01-15T18:15:15.027
|
|
Please provide detailed information about CVE-2021-0210
|
CVE:CVE-2021-0210
Description:An Information Exposure vulnerability in J-Web of Juniper Networks Junos OS allows an unauthenticated attacker to elevate their privileges over the target system through opportunistic use of an authenticated users session. This issue affects: Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S17; 17.3 versions prior to 17.3R3-S10; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.3 versions prior to 18.3R2-S4, 18.3R3-S4; 18.4 versions prior to 18.4R2-S5, 18.4R3-S5; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S3; 19.2 versions prior to 19.2R1-S5, 19.2R3, 19.2R3-S1; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R1-S4, 20.1R2; 20.2 versions prior to 20.2R1-S1, 20.2R2.
published:2021-01-15T18:15:15.090
|
|
Please provide detailed information about CVE-2021-0211
|
CVE:CVE-2021-0211
Description:An improper check for unusual or exceptional conditions in Juniper Networks Junos OS and Junos OS Evolved Routing Protocol Daemon (RPD) service allows an attacker to send a valid BGP FlowSpec message thereby causing an unexpected change in the route advertisements within the BGP FlowSpec domain leading to disruptions in network traffic causing a Denial of Service (DoS) condition. Continued receipt of these update messages will cause a sustained Denial of Service condition. This issue affects Juniper Networks: Junos OS: All versions prior to 17.3R3-S10 with the exceptions of 15.1X49-D240 on SRX Series and 15.1R7-S8 on EX Series; 17.3 versions prior to 17.3R3-S10; 17.4 versions prior to 17.4R2-S12, 17.4R3-S4; 18.1 versions prior to 18.1R3-S12; 18.2 versions prior to 18.2R2-S8, 18.2R3-S6; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R1-S8, 18.4R2-S6, 18.4R3-S6; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S3; 19.2 versions prior to 19.2R3-S1; 19.3 versions prior to 19.3R2-S5, 19.3R3-S1; 19.4 versions prior to 19.4R1-S3, 19.4R2-S3, 19.4R3; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R1-S3 20.2R2; 20.3 versions prior to 20.3R1-S1, 20.3R2. Junos OS Evolved: All versions prior to 20.3R1-S1-EVO, 20.3R2-EVO.
published:2021-01-15T18:15:15.167
|
|
Please provide detailed information about CVE-2021-0212
|
CVE:CVE-2021-0212
Description:An Information Exposure vulnerability in Juniper Networks Contrail Networking allows a locally authenticated attacker able to read files to retrieve administrator credentials stored in plaintext thereby elevating their privileges over the system. This issue affects: Juniper Networks Contrail Networking versions prior to 1911.31.
published:2021-01-15T18:15:15.260
|
|
Please provide detailed information about CVE-2021-0215
|
CVE:CVE-2021-0215
Description:On Juniper Networks Junos EX series, QFX Series, MX Series and SRX branch series devices, a memory leak occurs every time the 802.1X authenticator port interface flaps which can lead to other processes, such as the pfex process, responsible for packet forwarding, to crash and restart. An administrator can use the following CLI command to monitor the status of memory consumption: user@device> show task memory detail Please refer to https://kb.juniper.net/KB31522 for details. This issue affects Juniper Networks Junos OS: 14.1X53 versions prior to 14.1X53-D54; 15.1X49 versions prior to 15.1X49-D240 ; 15.1X53 versions prior to 15.1X53-D593; 16.1 versions prior to 16.1R7-S8; 17.2 versions prior to 17.2R3-S4; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S11, 17.4R3-S2; 18.1 versions prior to 18.1R3-S10 ; 18.2 versions prior to 18.2R2-S7, 18.2R3-S3; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R1-S7, 18.4R2-S4, 18.4R3-S2; 19.1 versions prior to 19.1R1-S5, 19.1R2-S2, 19.1R3; 19.2 versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R2-S3, 19.3R3; 19.4 versions prior to 19.4R1-S2, 19.4R2. This issue does not affect Juniper Networks Junos OS 12.3, 15.1.
published:2021-01-15T18:15:15.340
|
|
Please provide detailed information about CVE-2021-0217
|
CVE:CVE-2021-0217
Description:A vulnerability in processing of certain DHCP packets from adjacent clients on EX Series and QFX Series switches running Juniper Networks Junos OS with DHCP local/relay server configured may lead to exhaustion of DMA memory causing a Denial of Service (DoS). Over time, exploitation of this vulnerability may cause traffic to stop being forwarded, or to crashing of the fxpc process. When Packet DMA heap utilization reaches 99%, the system will become unstable. Packet DMA heap utilization can be monitored through the following command: user@junos# request pfe execute target fpc0 timeout 30 command "show heap" ID Base Total(b) Free(b) Used(b) % Name -- ---------- ----------- ----------- ----------- --- ----------- 0 213301a8 536870488 387228840 149641648 27 Kernel 1 91800000 8388608 3735120 4653488 55 DMA 2 92000000 75497472 74452192 1045280 1 PKT DMA DESC 3 d330000 335544320 257091400 78452920 23 Bcm_sdk 4 96800000 184549376 2408 184546968 99 Packet DMA <--- 5 903fffe0 20971504 20971504 0 0 Blob An indication of the issue occurring may be observed through the following log messages: Dec 10 08:07:00.124 2020 hostname fpc0 brcm_pkt_buf_alloc:523 (buf alloc) failed allocating packet buffer Dec 10 08:07:00.126 2020 hostname fpc0 (buf alloc) failed allocating packet buffer Dec 10 08:07:00.128 2020 hostname fpc0 brcm_pkt_buf_alloc:523 (buf alloc) failed allocating packet buffer Dec 10 08:07:00.130 2020 hostnameC fpc0 (buf alloc) failed allocating packet buffer This issue affects Juniper Networks Junos OS on EX Series and QFX Series: 17.4R3 versions prior to 17.4R3-S3; 18.1R3 versions between 18.1R3-S6 and 18.1R3-S11; 18.2R3 versions prior to 18.2R3-S6; 18.3R3 versions prior to 18.3R3-S4; 18.4R2 versions prior to 18.4R2-S5; 18.4R3 versions prior to 18.4R3-S6; 19.1 versions between 19.1R2 and 19.1R3-S3; 19.2 versions prior to 19.2R3-S1; 19.3 versions prior to 19.3R2-S5, 19.3R3; 19.4 versions prior to 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R1-S2, 20.2R2. Junos OS versions prior to 17.4R3 are unaffected by this vulnerability.
published:2021-01-15T18:15:15.417
|
|
Please provide detailed information about CVE-2021-0218
|
CVE:CVE-2021-0218
Description:A command injection vulnerability in the license-check daemon of Juniper Networks Junos OS that may allow a locally authenticated attacker with low privileges to execute commands with root privilege. license-check is a daemon used to manage licenses in Junos OS. To update licenses, a user executes the command 'request system license update' via the CLI. An attacker with access to this CLI command may be able to exploit the vulnerability. This issue affects Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R3-S6; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S3; 19.2 versions prior to 19.2R3-S1; 19.3 versions prior to 19.3R2-S5, 19.3R3; 19.4 versions prior to 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R1-S4, 20.1R2; 20.2 versions prior to 20.2R1-S2, 20.2R2.
published:2021-01-15T18:15:15.510
|
|
Please provide detailed information about CVE-2021-0219
|
CVE:CVE-2021-0219
Description:A command injection vulnerability in install package validation subsystem of Juniper Networks Junos OS that may allow a locally authenticated attacker with privileges to execute commands with root privilege. To validate a package in Junos before installation, an administrator executes the command 'request system software add validate-on-host' via the CLI. An attacker with access to this CLI command may be able to exploit this vulnerability. This issue affects Juniper Networks Junos OS: all versions prior to 17.3R3-S10; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R2-S8, 18.2R3-S6; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R1-S8, 18.4R2-S7, 18.4R3-S6; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S3; 19.2 versions prior to 19.2R3-S1; 19.3 versions prior to 19.3R2-S5, 19.3R3-S1; 19.4 versions prior to 19.4R2-S2, 19.4R3-S1; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R1-S2, 20.2R2; 20.3 versions prior to 20.3R1-S1, 20.3R2.
published:2021-01-15T18:15:15.590
|
|
Please provide detailed information about CVE-2021-0220
|
CVE:CVE-2021-0220
Description:The Junos Space Network Management Platform has been found to store shared secrets in a recoverable format that can be exposed through the UI. An attacker who is able to execute arbitrary code in the victim browser (for example via XSS) or access cached contents may be able to obtain a copy of credentials managed by Junos Space. The impact of a successful attack includes, but is not limited to, obtaining access to other servers connected to the Junos Space Management Platform. This issue affects Juniper Networks Junos Space versions prior to 20.3R1.
published:2021-01-15T18:15:15.667
|
|
Please provide detailed information about CVE-2021-0221
|
CVE:CVE-2021-0221
Description:In an EVPN/VXLAN scenario, if an IRB interface with a virtual gateway address (VGA) is configured on a PE, a traffic loop may occur upon receipt of specific IP multicast traffic. The traffic loop will cause interface traffic to increase abnormally, ultimately leading to a Denial of Service (DoS) in packet processing. The following command could be used to monitor the interface traffic: user@junos> monitor interface traffic Interface Link Input packets (pps) Output packets (pps) et-0/0/1 Up 6492089274364 (70994959) 6492089235319 (70994956) et-0/0/25 Up 343458103 (1) 156844 (0) ae0 Up 9132519197257 (70994959) 9132519139454 (70994956) This issue affects Juniper Networks Junos OS on QFX Series: all versions prior to 17.3R3-S10; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R2-S5, 18.4R3-S5; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S3; 19.2 versions prior to 19.2R1-S5, 19.2R3-S1; 19.3 versions prior to 19.3R2-S5, 19.3R3; 19.4 versions prior to 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R1-S2, 20.2R2.
published:2021-01-15T18:15:15.760
|
|
Please provide detailed information about CVE-2021-0222
|
CVE:CVE-2021-0222
Description:A vulnerability in Juniper Networks Junos OS allows an attacker to cause a Denial of Service (DoS) to the device by sending certain crafted protocol packets from an adjacent device with invalid payloads to the device. These crafted packets, which should be discarded, are instead replicated and sent to the RE. Over time, a Denial of Service (DoS) occurs. Continued receipt of these crafted protocol packets will cause an extended Denial of Service (DoS) condition, which may cause wider traffic impact due to protocol flapping. An indication of compromise is to check "monitor interface traffic" on the ingress and egress port packet counts. For each ingress packet, two duplicate packets are seen on egress. This issue can be triggered by IPv4 and IPv6 packets. This issue affects all traffic through the device. This issue affects: Juniper Networks Junos OS: 14.1X53 versions prior to 14.1X53-D53 on EX4300, QFX3500, QFX5100, EX4600; 15.1 versions prior to 15.1R7-S6 on EX4300, QFX3500, QFX5100, EX4600; 16.1 versions prior to 16.1R7-S7 on EX4300, QFX5100, EX4600; 17.1 versions prior to 17.1R2-S11 on EX4300, QFX5100, EX4600; 17.1 versions prior to 117.1R3-S2 on EX4300; 17.2 versions prior to 17.2R1-S9 on EX4300; 17.2 versions prior to 17.2R3-S3 on EX4300, QFX5100, EX4600, QFX5110, QFX5200; 17.3 versions prior to 17.3R2-S5, 17.3R3-S7 on EX4300, QFX5100, EX4600, QFX5110, QFX5200; 17.4 versions prior to 17.4R2-S9, 17.4R3 on EX4300, QFX5100, EX4600, QFX5110, QFX5200; 18.1 versions prior to 18.1R3-S9 on EX4300, QFX5100, EX4600, QFX5110, QFX5200, QFX5210, EX2300, EX3400; 18.2 versions prior to 18.2R2-S7 on EX4300; 18.2 versions prior to 18.2R3-S3 on EX4300, QFX5100, EX4600, QFX5110, QFX5200, QFX5210, EX2300, EX3400; 18.3 versions prior to 18.3R2-S3, on EX4300; 18.3 versions prior to 18.3R1-S7, 18.3R3-S1 on EX4300, QFX5100, EX4600, QFX5110, QFX5200, QFX5210, QFX5120, EX4650, EX2300, EX3400; 18.4 versions prior to 18.4R1-S5, 18.4R2-S3, 18.4R3 on EX4300, QFX5100, EX4600, QFX5110, QFX5200, QFX5210, QFX5120, EX4650, EX2300, EX3400; 19.1 versions prior to 19.1R1-S4, 19.1R2-S1, 19.1R3 on EX4300, QFX5100, EX4600, QFX5110, QFX5200, QFX5210, QFX5120, EX4650, EX2300, EX3400; 19.2 versions prior to 19.2R1-S4, 19.2R2 on EX4300; 19.2 versions prior to 19.2R1-S3, 19.2R2 on QFX5100, EX4600, QFX5110, QFX5200, QFX5210, QFX5120, EX4650, EX2300, EX3400; 19.3 versions prior to 19.3R2-S1, 19.3R3 on EX4300; 19.3 versions prior to 19.3R1-S1, 19.3R2, 19.3R3 on QFX5100, EX4600, QFX5110, QFX5200, QFX5210, QFX5120, EX4650, EX2300, EX3400;
published:2021-01-15T18:15:15.823
|
|
Please provide detailed information about CVE-2021-0223
|
CVE:CVE-2021-0223
Description:A local privilege escalation vulnerability in telnetd.real of Juniper Networks Junos OS may allow a locally authenticated shell user to escalate privileges and execute arbitrary commands as root. telnetd.real is shipped with setuid permissions enabled and is owned by the root user, allowing local users to run telnetd.real with root privileges. This issue affects Juniper Networks Junos OS: all versions prior to 15.1R7-S9; 17.3 versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.3 versions prior to 18.3R2-S4, 18.3R3-S4; 18.4 versions prior to 18.4R2-S7, 18.4R3-S6; 19.1 versions prior to 19.1R2-S2, 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S1; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R1-S4, 20.1R2; 20.2 versions prior to 20.2R2.
published:2021-01-15T18:15:15.900
|
|
Please provide detailed information about CVE-2021-21237
|
CVE:CVE-2021-21237
Description:Git LFS is a command line extension for managing large files with Git. On Windows, if Git LFS operates on a malicious repository with a git.bat or git.exe file in the current directory, that program would be executed, permitting the attacker to execute arbitrary code. This does not affect Unix systems. This is the result of an incomplete fix for CVE-2020-27955. This issue occurs because on Windows, Go includes (and prefers) the current directory when the name of a command run does not contain a directory separator. Other than avoiding untrusted repositories or using a different operating system, there is no workaround. This is fixed in v2.13.2.
published:2021-01-15T18:15:15.980
|
|
Please provide detailed information about CVE-2021-21243
|
CVE:CVE-2021-21243
Description:OneDev is an all-in-one devops platform. In OneDev before version 4.0.3, a Kubernetes REST endpoint exposes two methods that deserialize untrusted data from the request body. These endpoints do not enforce any authentication or authorization checks. This issue may lead to pre-auth RCE. This issue was fixed in 4.0.3 by not using deserialization at KubernetesResource side.
published:2021-01-15T20:15:12.037
|
|
Please provide detailed information about CVE-2021-21244
|
CVE:CVE-2021-21244
Description:OneDev is an all-in-one devops platform. In OneDev before version 4.0.3, There is a vulnerability that enabled pre-auth server side template injection via Bean validation message tampering. Full details in the reference GHSA. This issue was fixed in 4.0.3 by disabling validation interpolation completely.
published:2021-01-15T20:15:12.097
|
|
Please provide detailed information about CVE-2021-21242
|
CVE:CVE-2021-21242
Description:OneDev is an all-in-one devops platform. In OneDev before version 4.0.3, there is a critical vulnerability which can lead to pre-auth remote code execution. AttachmentUploadServlet deserializes untrusted data from the `Attachment-Support` header. This Servlet does not enforce any authentication or authorization checks. This issue may lead to pre-auth remote code execution. This issue was fixed in 4.0.3 by removing AttachmentUploadServlet and not using deserialization
published:2021-01-15T21:15:13.227
|
|
Please provide detailed information about CVE-2021-21245
|
CVE:CVE-2021-21245
Description:OneDev is an all-in-one devops platform. In OneDev before version 4.0.3, AttachmentUploadServlet also saves user controlled data (`request.getInputStream()`) to a user specified location (`request.getHeader("File-Name")`). This issue may lead to arbitrary file upload which can be used to upload a WebShell to OneDev server. This issue is addressed in 4.0.3 by only allowing uploaded file to be in attachments folder. The webshell issue is not possible as OneDev never executes files in attachments folder.
published:2021-01-15T21:15:13.413
|
|
Please provide detailed information about CVE-2021-21246
|
CVE:CVE-2021-21246
Description:OneDev is an all-in-one devops platform. In OneDev before version 4.0.3, the REST UserResource endpoint performs a security check to make sure that only administrators can list user details. However for the `/users/{id}` endpoint there are no security checks enforced so it is possible to retrieve arbitrary user details including their Access Tokens! These access tokens can be used to access the API or clone code in the build spec via the HTTP(S) protocol. It has permissions to all projects accessible by the user account. This issue may lead to `Sensitive data leak` and leak the Access Token which can be used to impersonate the administrator or any other users. This issue was addressed in 4.0.3 by removing user info from restful api.
published:2021-01-15T21:15:13.490
|
|
Please provide detailed information about CVE-2021-21247
|
CVE:CVE-2021-21247
Description:OneDev is an all-in-one devops platform. In OneDev before version 4.0.3, the application's BasePage registers an AJAX event listener (`AbstractPostAjaxBehavior`) in all pages other than the login page. This listener decodes and deserializes the `data` query parameter. We can access this listener by submitting a POST request to any page. This issue may lead to `post-auth RCE` This endpoint is subject to authentication and, therefore, requires a valid user to carry on the attack. This issue was addressed in 4.0.3 by encrypting serialization payload with secrets only known to server.
published:2021-01-15T21:15:13.583
|
|
Please provide detailed information about CVE-2021-21248
|
CVE:CVE-2021-21248
Description:OneDev is an all-in-one devops platform. In OneDev before version 4.0.3, there is a critical vulnerability involving the build endpoint parameters. InputSpec is used to define parameters of a Build spec. It does so by using dynamically generated Groovy classes. A user able to control job parameters can run arbitrary code on OneDev's server by injecting arbitrary Groovy code. The ultimate result is in the injection of a static constructor that will run arbitrary code. For a full example refer to the referenced GHSA. This issue was addressed in 4.0.3 by escaping special characters such as quote from user input.
published:2021-01-15T21:15:13.663
|
|
Please provide detailed information about CVE-2021-21249
|
CVE:CVE-2021-21249
Description:OneDev is an all-in-one devops platform. In OneDev before version 4.0.3, there is an issue involving YAML parsing which can lead to post-auth remote code execution. In order to parse and process YAML files, OneDev uses SnakeYaml which by default (when not using `SafeConstructor`) allows the instantiation of arbitrary classes. We can leverage that to run arbitrary code by instantiating classes such as `javax.script.ScriptEngineManager` and using `URLClassLoader` to load the script engine provider, resulting in the instantiation of a user controlled class. For a full example refer to the referenced GHSA. This issue was addressed in 4.0.3 by only allowing certain known classes to be deserialized
published:2021-01-15T21:15:13.740
|
|
Please provide detailed information about CVE-2021-21250
|
CVE:CVE-2021-21250
Description:OneDev is an all-in-one devops platform. In OneDev before version 4.0.3, there is a critical vulnerability which may lead to arbitrary file read. When BuildSpec is provided in XML format, the spec is processed by XmlBuildSpecMigrator.migrate(buildSpecString); which processes the XML document without preventing the expansion of external entities. These entities can be configured to read arbitrary files from the file system and dump their contents in the final XML document to be migrated. If the files are dumped in properties included in the YAML file, it will be possible for an attacker to read them. If not, it is possible for an attacker to exfiltrate the contents of these files Out Of Band. This issue was addressed in 4.0.3 by ignoring ENTITY instructions in xml file.
published:2021-01-15T21:15:13.803
|
|
Please provide detailed information about CVE-2021-21251
|
CVE:CVE-2021-21251
Description:OneDev is an all-in-one devops platform. In OneDev before version 4.0.3 there is a critical "zip slip" vulnerability. This issue may lead to arbitrary file write. The KubernetesResource REST endpoint untars user controlled data from the request body using TarUtils. TarUtils is a custom library method leveraging Apache Commons Compress. During the untar process, there are no checks in place to prevent an untarred file from traversing the file system and overriding an existing file. For a successful exploitation, the attacker requires a valid __JobToken__ which may not be possible to get without using any of the other reported vulnerabilities. But this should be considered a vulnerability in `io.onedev.commons.utils.TarUtils` since it lives in a different artifact and can affect other projects using it. This issue was addressed in 4.0.3 by validating paths in tar archive to only allow them to be in specified folder when extracted.
published:2021-01-15T21:15:13.880
|
|
Please provide detailed information about CVE-2021-3162
|
CVE:CVE-2021-3162
Description:Docker Desktop Community before 2.5.0.0 on macOS mishandles certificate checking, leading to local privilege escalation.
published:2021-01-15T22:15:13.227
|
|
Please provide detailed information about CVE-2021-3113
|
CVE:CVE-2021-3113
Description:Netsia SEBA+ through 0.16.1 build 70-e669dcd7 allows remote attackers to discover session cookies via a direct /session/list/allActiveSession request. For example, the attacker can discover the admin's cookie if the admin account happens to be logged in when the allActiveSession request occurs, and can then use that cookie immediately for admin access,
published:2021-01-17T03:15:15.457
|
|
Please provide detailed information about CVE-2021-3166
|
CVE:CVE-2021-3166
Description:An issue was discovered on ASUS DSL-N14U-B1 1.1.2.3_805 devices. An attacker can upload arbitrary file content as a firmware update when the filename Settings_DSL-N14U-B1.trx is used. Once this file is loaded, shutdown measures on a wide range of services are triggered as if it were a real update, resulting in a persistent outage of those services.
published:2021-01-18T05:15:12.527
|
|
Please provide detailed information about CVE-2021-25294
|
CVE:CVE-2021-25294
Description:OpenCATS through 0.9.5-3 unsafely deserializes index.php?m=activity requests, leading to remote code execution. This occurs because lib/DataGrid.php calls unserialize for the parametersactivity:ActivityDataGrid parameter. The PHP object injection exploit chain can leverage an __destruct magic method in guzzlehttp.
published:2021-01-18T06:15:12.897
|
|
Please provide detailed information about CVE-2021-25295
|
CVE:CVE-2021-25295
Description:OpenCATS through 0.9.5-3 has multiple Cross-site Scripting (XSS) issues.
published:2021-01-18T06:15:13.707
|
|
Please provide detailed information about CVE-2021-25173
|
CVE:CVE-2021-25173
Description:An issue was discovered in Open Design Alliance Drawings SDK before 2021.12. A memory allocation with excessive size vulnerability exists when reading malformed DGN files, which allows attackers to cause a crash, potentially enabling denial of service (crash, exit, or restart).
published:2021-01-18T08:15:13.023
|
|
Please provide detailed information about CVE-2021-25174
|
CVE:CVE-2021-25174
Description:An issue was discovered in Open Design Alliance Drawings SDK before 2021.12. A memory corruption vulnerability exists when reading malformed DGN files. It can allow attackers to cause a crash, potentially enabling denial of service (Crash, Exit, or Restart).
published:2021-01-18T08:15:13.117
|
|
Please provide detailed information about CVE-2021-25175
|
CVE:CVE-2021-25175
Description:An issue was discovered in Open Design Alliance Drawings SDK before 2021.11. A Type Conversion issue exists when rendering malformed .DXF and .DWG files. This can allow attackers to cause a crash, potentially enabling a denial of service attack (Crash, Exit, or Restart).
published:2021-01-18T08:15:13.180
|
|
Please provide detailed information about CVE-2021-25176
|
CVE:CVE-2021-25176
Description:An issue was discovered in Open Design Alliance Drawings SDK before 2021.11. A NULL pointer dereference exists when rendering malformed .DXF and .DWG files. This can allow attackers to cause a crash, potentially enabling a denial of service attack (Crash, Exit, or Restart).
published:2021-01-18T08:15:13.227
|
|
Please provide detailed information about CVE-2021-25177
|
CVE:CVE-2021-25177
Description:An issue was discovered in Open Design Alliance Drawings SDK before 2021.11. A Type Confusion issue exists when rendering malformed .DXF and .DWG files. This can allow attackers to cause a crash, potentially enabling a denial of service attack (Crash, Exit, or Restart).
published:2021-01-18T08:15:13.273
|
|
Please provide detailed information about CVE-2021-25178
|
CVE:CVE-2021-25178
Description:An issue was discovered in Open Design Alliance Drawings SDK before 2021.11. A stack-based buffer overflow vulnerability exists when the recover operation is run with malformed .DXF and .DWG files. This can allow attackers to cause a crash potentially enabling a denial of service attack (Crash, Exit, or Restart) or possible code execution.
published:2021-01-18T08:15:13.337
|
|
Please provide detailed information about CVE-2020-28476
|
CVE:CVE-2020-28476
Description:Rejected reason: DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2021-23336. Reason: This candidate is a reservation duplicate of CVE-2021-23336. Notes: All CVE users should reference CVE-2021-23336 instead of this candidate. All references and descriptions in this candidate have been removed to prevent accidental usage
published:2021-01-18T12:15:13.113
|
|
Please provide detailed information about CVE-2021-20619
|
CVE:CVE-2021-20619
Description:Cross-site scripting vulnerability in GROWI (v4.2 Series) versions prior to v4.2.3 allows remote attackers to inject an arbitrary script via unspecified vectors.
published:2021-01-19T05:15:13.933
|
|
Please provide detailed information about CVE-2021-3177
|
CVE:CVE-2021-3177
Description:Python 3.x through 3.9.1 has a buffer overflow in PyCArg_repr in _ctypes/callproc.c, which may lead to remote code execution in certain Python applications that accept floating-point numbers as untrusted input, as demonstrated by a 1e300 argument to c_double.from_param. This occurs because sprintf is used unsafely.
published:2021-01-19T06:15:12.967
|
|
Please provide detailed information about CVE-2021-3178
|
CVE:CVE-2021-3178
Description:fs/nfsd/nfs3xdr.c in the Linux kernel through 5.10.8, when there is an NFS export of a subdirectory of a filesystem, allows remote attackers to traverse to other parts of the filesystem via READDIRPLUS. NOTE: some parties argue that such a subdirectory export is not intended to prevent this attack; see also the exports(5) no_subtree_check default behavior
published:2021-01-19T07:15:13.443
|
|
Please provide detailed information about CVE-2021-22850
|
CVE:CVE-2021-22850
Description:HGiga EIP product lacks ineffective access control in certain pages that allow attackers to access database or perform privileged functions.
published:2021-01-19T10:15:15.243
|
|
Please provide detailed information about CVE-2021-22851
|
CVE:CVE-2021-22851
Description:HGiga EIP product contains SQL Injection vulnerability. Attackers can inject SQL commands into specific URL parameter (document management page) to obtain database schema and data.
published:2021-01-19T10:15:15.807
|
|
Please provide detailed information about CVE-2021-22852
|
CVE:CVE-2021-22852
Description:HGiga EIP product contains SQL Injection vulnerability. Attackers can inject SQL commands into specific URL parameter (online registration) to obtain database schema and data.
published:2021-01-19T10:15:15.930
|
|
Please provide detailed information about CVE-2021-3181
|
CVE:CVE-2021-3181
Description:rfc822.c in Mutt through 2.0.4 allows remote attackers to cause a denial of service (mailbox unavailability) by sending email messages with sequences of semicolon characters in RFC822 address fields (aka terminators of empty groups). A small email message from the attacker can cause large memory consumption, and the victim may then be unable to see email messages from other persons.
published:2021-01-19T15:15:12.327
|
|
Please provide detailed information about CVE-2021-3182
|
CVE:CVE-2021-3182
Description:D-Link DCS-5220 devices have a buffer overflow. NOTE: This vulnerability only affects products that are no longer supported by the maintainer
published:2021-01-19T15:15:12.403
|
|
Please provide detailed information about CVE-2021-3183
|
CVE:CVE-2021-3183
Description:Files.com Fat Client 3.3.6 allows authentication bypass because the client continues to have access after a logout and a removal of a login profile.
published:2021-01-19T15:15:12.467
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.